Product Details:
|
Name: | ATEX IP66 Explosion Proof Fluorescent Light G3/4”Conduit For Zone1,2 Zone 21,22 | Input Voltage(v): | 220V, 50~60HZ |
---|---|---|---|
Ex Mark: | Ex D IIC T6 | Ip Rating: | IP66 |
Item Type: | Explosion Proof Fluorescent Light | Tube: | 1*18W, 2*18W, 3*18W |
Mounting Type: | Embedded; Pendant; Ceiling; Wall Bracket;Stanchion | Material: | Steel Plate, Stainless Steel Optional |
Tube Brand: | , Foshan, Op, Optional | Certifications: | ATEX, ROHS,CE,CCC,IEC,CNEX,ISO |
High Light: | explosion proof lighting,ATEX IP66 explosion proof lighting,atex explosion proof led Fluorescent light |
T8 LED Explosion Proof Fluorescent Light 220VPendant Install Industry Tube Light
Features:
1. The shell is formed by bending of imported steel plate, and the surface is high-voltage electrostatic spray;
2. Adopt an integral sealing structure, with strong waterproof and dustproof ability;
3. Built-in ballast with encapsulated structure, with good explosion-proof performance;
4. Equipped with well-known brand fluorescent tubes, with long life and high luminous efficiency;
5. The fluorescent lamp with emergency device will automatically switch to the emergency lighting state when the power supply line loses power;
6. There are specially designed overcharge and overdischarge protection circuits in the emergency device;
7. The transparent cover of ceiling-mounted and embedded Type 1 lamps is made of polycarbonate;
8. The transparent cover of the embedded type 2 lamps adopts high-strength flat tempered glass;
9. The built-in type 2 lamps have less exposed parts after installation, which can effectively save the height of the plant and is beautiful and generous;
10. Steel pipe or cable wiring.
Installation and maintenance:
11. The sealing ring of the lead-in device should be reliably pressed firmly and the cable should be clamped;
12. Before the lamp is put into use, the internal and external ground must be firmly connected to the user's site grounding system;
13. When installing and maintaining the lamp, it is strictly forbidden to open it with power;
14. Regularly check the sealing ring, if it is found to be aging, it should be replaced in time;
15. The emergency battery of the fluorescent lamp is in the empty state when it leaves the factory, and the user should fully charge it before using it normally.
16. When the emergency battery of the fluorescent lamp is stored for a long time, it should be charged and discharged for 1 to 3 times every 6 months.
Model | BHY |
Rated Power | 18W/20W/40W |
Rated Voltage | 220V/50~60Hz |
Protection Grade | IP66 |
Anti-corrosion Grade | WF2 |
Specification of Cable | 10-14ф,mm |
Explosion-proof Sign | Ex d IIC T6 |
Inlet Specification | G3/4" |
Contact Person: Ms. Ivy
Tel: 18951239295
Fax: 86-519-83987298